What to Record About Your Water Before Seeking Advice
Note any sulfur or rotten-egg odor noticed in household water
Recording when and where the smell is strongest helps narrow down if the issue is related to water source or pipes.
Gather any recent lab test results specific to your well or water source
Laboratory testing of your water is essential since area sampling cannot confirm your household's sulfide concentration.
Identify your water supply type (private well, public supply, etc.)
This affects what contaminants may be present and how treatment options apply.
How Sampling Depth and Water Source Affect Expectations
Sampling in Palm Beach County aquifer 120UFAQ was from wells 1450 to 1673 feet deep
Deeper wells can have different sulfide levels than shallower ones; your well depth should be noted.
Area sulfide data comes from groundwater, not surface water or municipal distribution
Expect differences if your water is not from similar aquifer conditions.
Interpreting the Area Sulfide Range and Federal Standards
Government sampling showed sulfide from 2.8 to 5.5 mg/L median in three wells
This range documents what was detected but does not reflect your specific water quality.
No sulfide result in this area exceeded any federal health-based threshold
Detection does not mean a safety violation; it may only cause taste or odor concerns.
Long-Term Effects if Sulfur Smell Is Not Addressed
Persistent sulfur odor can discourage water use for drinking and cooking
The smell does not indicate a health hazard but may impact household water enjoyment.
Odor-causing sulfide may contribute to corrosion or staining over time
Unchecked sulfide can affect plumbing and fixtures, increasing maintenance needs.
Symptoms That May or May Not Indicate Sulfur Smell from Sulfide
Rotten-egg smell near taps or in hot water is a common symptom
This odor is often caused by sulfide gas released from water.
Cloudy or colored water is not necessarily related to sulfide presence
Other factors cause turbidity or discoloration, so testing is needed.
Sulfur odors are not always noticeable throughout the household
They may vary by tap or water temperature, so observe carefully.
Maintenance Rhythm of the Documented Technology
The Fleck Rotten-Egg Sulfur Smell Filter ships ready to configure for household use
This system uses established filtration methods to reduce sulfur odors from sulfide.
Periodic filter media replacement and system checks are recommended
Following manufacturer guidelines ensures ongoing odor control and system performance.
The sulfide data summarized here come from groundwater samples in Palm Beach County aquifer 120UFAQ, collected from wells 1450 to 1673 feet deep between 2015 and 2026. For full details, consult the U.S. Geological Survey monitoring location 265600080080201 record.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2026-01-26. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Sulfide in the 120UFAQ aquifer (Palm Beach County): 4 results from 3 wells, median 5.5 mg/L, range 2.8-5.5 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.