Fleck Rotten-Egg Sulfur Smell Filter

Buy Now

View full details

If your home in Montgomery County has a noticeable sulfur smell—often described as rotten eggs—especially when using water from deep wells, this checklist helps clarify what local government sulfide sampling reveals about the problem and what you should document before choosing a treatment.

1. Scope of Sampling Behind Sulfide Data

Four Wells Sampled in Montgomery County Aquifer 122JSPR

• Data comes from 4 groundwater samples taken from 4 separate wells.
• Sampling occurred between April 15 and May 13, 2011.
• Wells were between 467 and 1050 feet deep, representative of local groundwater sources.
• This is a small dataset, so it provides limited but official insight into area sulfide levels.

2. Household Sulfur Smell: Symptoms That May or May Not Indicate Sulfide

Observable Signs Related to Sulfur Smell

• Rotten egg odor noticeable at faucets, showers, or hot water use.
• Odor often intensifies when water is heated.
• Discoloration or staining generally not caused by sulfide.
• Other odors or tastes might signal different water issues.

3. Interpreting the Median and Range in Montgomery County’s Sulfide Record

Reading the Data as a Montgomery County Homeowner

• The median sulfide concentration was 0.0 mg/L; half the samples showed no measurable sulfide.
• The range was from 0.0 to 0.0 mg/L, indicating no samples exceeded the detection threshold.
• Three of the four samples had sulfide detected, but all were below reporting limits, meaning very low or trace amounts.
• No federal thresholds for sulfide were exceeded in this sampling.

4. Understanding 'Detected,' 'Median,' and 'Range' in this Context

What These Terms Mean for Your Water

• Detected means the measurement instrument registered sulfide, not that it is high or dangerous.
• Median shows the middle value; here it is zero, so typical levels in this data are very low.
• Range indicates variation; this narrow range signals very consistent low sulfide presence.
• This data reflects wells sampled in the area, not a specific household well.

5. What to Write Down Before Deciding on Treatment

Essential Information to Help Choose Water Treatment

• Note exactly which fixtures show the sulfur smell and whether it occurs continuously.
• Record if the odor appears only when water is hot or cold.
• Keep track of any discoloration or other water quality issues to differentiate causes.
• Consider getting a specific sulfide test on your own well water to measure actual levels.
• Identify if any recent changes in water source or plumbing could influence odor.

What Not to Assume from This Area Data: The local government sampling shows very low or undetectable sulfide in Montgomery County aquifer 122JSPR wells sampled, with no federal thresholds exceeded. However, this small dataset does not guarantee your household well water matches these levels. Individual water testing remains necessary to understand your specific sulfide conditions and sulfur smell causes.

For homes confirming sulfide-related sulfur smell, the Fleck Rotten-Egg Sulfur Smell Filter ships ready to configure and offers a documented solution for reducing sulfur odors in household water.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2011-05-13. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Sulfide in the 122JSPR aquifer (Montgomery County): 4 results from 4 wells, median 0.0 mg/L, range 0.0-0.0 mg/L; none above any federal threshold