Fleck Rotten-Egg Sulfur Smell Filter

Buy Now

View full details

Lake County Aquifer and Water Supply Overview

Lake County's residential water often comes from aquifer 110QRNR, a natural underground source supplying wells that can be 20 to 150 feet deep. Water from this aquifer moves through underground rock and sediment before reaching household taps.

How Treatment Technology Removes Sulfur Smell

The chemical basis of sulfur smell

Hydrogen sulfide gas, indicated by sulfide presence in water, creates the characteristic rotten-egg odor. Although detected in area samples, the levels recorded by the U.S. Geological Survey do not suggest safety concerns but may affect water's smell.

Fleck Rotten-Egg Sulfur Smell Filter action

This filter uses targeted media to neutralize sulfide compounds responsible for the odor, transforming or removing the chemical forms that cause sulfur smell before water enters household plumbing.

Judging Treatment Capacity by Household Water Use

Estimating daily water demand

Consider the number of residents and typical daily water use to determine how much filtered water is needed. Treatment systems configured for correct flow rates ensure consistent odor reduction without excess waste.

Matching filter throughput

The filter ships ready to configure for typical household consumption, making it practical to balance treatment capacity with use patterns.

The Role of Plumbing Material and Age

Plumbing influence on sulfur smell

Older plumbing, especially with certain metals, may interact with sulfide, sometimes intensifying odor or causing additional reactions. Plumbing updates can affect the perception of sulfur smell independently from source water quality.

Plumbing maintenance and odor sources

Periodic cleaning and inspection reduce internal sources of odor, clarifying whether the smell originates in the source water.

Effect of Sample Depth and Well Characteristics

Sample depth variability in sulfide detection

Samples from wells 20 to 150 feet deep show sulfide levels detected across this range, with median 0.006 mg/L and a maximum of 0.024 mg/L. This variability suggests that well depth and local geology influence sulfide presence.

Differences in private wells and municipal supply

Private wells tapping into this aquifer may experience different sulfide levels based on depth and location. Municipal water derived from surface sources or treated groundwater typically has different sulfide profiles, often managed to minimize sulfur smell.

Sample Size and Interpretation of Sulfide Data

Limited wells sampled

Only three wells were sampled by USGS over a three-year span, providing a snapshot rather than a comprehensive regional assessment. While useful, this small sample size means individual well testing remains essential for accurate household evaluation.

Interpreting sulfide detection

All sulfide results were below federal thresholds and reflect natural aquifer conditions. Detection alone does not imply any health risk but signals the potential for odor concerns.

Recommended Testing and Next Steps

To determine your home's specific needs, order a laboratory test for sulfide concentration from a certified water testing facility. A measured sulfide level helps decide if the Fleck Rotten-Egg Sulfur Smell Filter, which ships ready to configure, can address your household's sulfur odor effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2013-08-28. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Sulfide in the 110QRNR aquifer (Lake County): 3 results from 3 wells, median 0.006 mg/L, range 0.0-0.024 mg/L; none above any federal threshold