Autotrol Hard Water System

Buy Now

View full details

U.S. Geological Survey groundwater sampling in Fremont County's aquifer recorded hardness in 11 samples from 10 different wells, showing a median value of 118.0 mg/L and a range between 77.8 and 325.0 mg/L. These measurements reflect conditions in the regional aquifer, not individual wells, and none exceeded federal hardness-related thresholds.

How does a Fremont County homeowner interpret median and range hardness values?

The median hardness value of 118.0 mg/L indicates that half the samples were above this level and half below, providing a middle point for the area's water hardness. The range from 77.8 to 325.0 mg/L shows variability among wells sampled, from moderate to relatively higher hardness levels. This variability suggests that your home's water hardness could fall anywhere within this distribution and would require individual testing for exact determination.

What effect do plumbing materials and age have separate from the aquifer's hardness?

Water hardness originates primarily from calcium and magnesium dissolved in the source water. However, plumbing materials and their condition can influence water quality perception. Older metal pipes may interact with hard water differently than newer materials, potentially causing scaling or other aesthetic changes. This interaction does not change the original hardness levels measured in the aquifer but can affect your home's water experience.

How do seasonal or multi-year variations appear in the groundwater hardness record?

The USGS samples were collected from July 2010 to September 2011, spanning over a year and covering different seasons. The range of hardness values during this time indicates some fluctuation, possibly reflecting seasonal changes like precipitation or groundwater recharge patterns. These temporal variations emphasize that hardness can vary over time in the regional aquifer but remain within the observed range.

What additional water quality questions should commercial or industrial operators consider beyond residential concerns?

Commercial and industrial users often evaluate water hardness with a focus on capacity demands and the impact on equipment longevity. They may also require more frequent or comprehensive testing to adapt treatment systems as needed based on production schedules or regulatory compliance. Residential concerns primarily center on daily household water use and aesthetic effects, whereas commercial operations involve scaling management and operational continuity.

How can a Fremont County household judge treatment equipment capacity against daily water demand?

Choosing the right equipment hinges on matching the water softening system's capacity to your household’s average daily water use and hardness levels within the regional range. Knowing the median hardness provides a baseline, but actual hardness from your home's supply is essential for precise sizing. The Autotrol Hard Water System ships ready to configure and is designed to handle various hardness levels, making it suitable for many typical household demands in Fremont County.

In summary, understanding regional groundwater hardness measurements, plumbing influences, and temporal variations provides a foundation for evaluating water softening needs. Testing your home's water and comparing demand with treatment capacity helps in selecting an appropriate system like the Autotrol Hard Water System to address hard water effectively.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2011-09-26. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the aquifer (Fremont County): 11 results from 10 wells, median 118.0 mg/L, range 77.8-325.0 mg/L; none above any federal threshold