Record of Iron Concentrations in Kings County Aquifer 112JMCO and What It Means
Government groundwater sampling by the U.S. Geological Survey from 2010 to 2013 in Kings County’s aquifer 112JMCO documented iron present in all samples from four wells. Fourteen results showed iron detected at concentrations ranging from 8.1 to 29,600 micrograms per liter, with a median concentration of 25,950 micrograms per liter. None of these findings exceeded federal safety thresholds, indicating no health-based violations documented in this regional dataset. However, the presence of iron at these levels can influence water aesthetics and household system function, which is important for sizing treatment equipment.
Information to Gather Before Planning Your Complete Well Water Treatment
Before considering treatment options, note the depth of your well, the measured iron levels from your own water tests, your household water usage, and the plumbing materials and condition in your home. Because the regional data comes from wells screened at depths between 192 and 405 feet, your well’s depth may impact iron concentration and treatment needs. Collecting your well water test results for iron and other relevant constituents is essential, as these regional figures represent area conditions rather than your specific water.
Impact of Plumbing Materials and Age on Your Water Quality
Plumbing materials such as galvanized steel, copper, or plastic pipes, and their age, can influence how iron and other minerals behave after water leaves the well. Older or corroded pipes may cause discoloration or staining, even if source water iron concentrations are moderate. Conversely, modern plumbing may reduce some interactions but not eliminate iron-related effects originating in the source water. Differentiating water quality issues caused by the source from those related to plumbing is crucial when planning treatment.
Stepwise Assessment: From Household Checks to Laboratory Testing
Begin by observing water clarity, color, and staining patterns in faucets and appliances, noting any fluctuations. Next, have your well water tested by a certified laboratory for iron concentration, as well as for other potential constituents relevant to your region. Water testing enables accurate sizing and configuration of treatment equipment. If plumbing-related factors are suspected, consider having plumbing evaluated separately. This methodical approach helps avoid unnecessary treatments and targets the actual issue efficiently.
Explaining 'Detected,' 'Median,' and 'Range' in Government Sampling Records
In the USGS sampling record for Kings County’s aquifer 112JMCO, 'detected' means that every tested sample measured some iron presence; none were below the reporting limit. The 'median' is the middle value in the distribution of results (25,950 micrograms per liter), showing a typical concentration near half the samples. The 'range' spans from the lowest (8.1 micrograms per liter) to the highest (29,600 micrograms per liter) detected concentrations, illustrating how iron levels vary among wells and over time. These values describe regional conditions but do not define any individual well's exact water quality.
Differentiating Iron-Related Issues from Other Water Concerns
Iron presence should not be confused with water hardness or other mineral content like manganese or sulfur compounds. Iron is primarily responsible for reddish staining and metallic taste but does not indicate health risks when below federal thresholds. Unlike microbial contamination or chemical pollutants, iron-related issues are often aesthetic or functional. Recognizing this distinction helps prioritize testing and treatment decisions appropriate for your water condition.
Determining Treatment Capacity Based on Household Water Demand
Your household’s daily water use directly affects the required grain capacity of a treatment system. The Autotrol Complete Well System offers a 32,000-grain capacity, which provides a benchmark for sizing according to consumption patterns. Estimate your daily water volume to assess if this capacity covers your needs adequately. Matching system capacity with actual demand ensures effective iron management and efficient operation without premature exhaustion or oversizing.
In summary, starting from documented regional iron levels, this page guided you to gather personal well data, understand plumbing impacts, assess water quality systematically, interpret sampling metrics, and differentiate iron problems from others. This process leads to selecting appropriately sized treatment equipment like the Autotrol Complete Well System to meet your home’s specific conditions and water use.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2013-06-27. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Iron in the 112JMCO aquifer (Kings County): 14 results from 4 wells, median 25950.0 ug/L, range 8.1-29600.0 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.