Fleck Arsenic Filter

Buy Now

View full details

Understanding Your Certified Laboratory Arsenic Test Results

If you're checking your home's water for arsenic, your certified laboratory will report results in micrograms per liter (µg/L). This number reflects how much arsenic the test found in your water sample but tells nothing about safety without further context. Testing your specific well is the only way to know your water's arsenic level; regional data alone cannot determine the exact content of your home's supply.

Laboratories typically report numbers down to a reporting limit; anything below that is noted as ‘below detection.’ A detected value means the instrument identified arsenic, not that it exceeds any safety standard. Understanding the difference between detection and health limits is essential when reviewing your report.

Additional Questions for Commercial or Industrial Operators

Households primarily focus on daily exposure and health-based concerns. Commercial or industrial operations, however, must consider larger volumes, regulatory compliance, and potential impacts on processes or equipment. These factors may require more frequent testing or additional treatment capacity that goes beyond typical household needs.

Preparing Information Before Seeking Treatment Advice

Before you explore options for arsenic treatment, write down these key details:

• Your laboratory's arsenic test results and the date of testing.
• The depth and type of your well, if known.
• Daily household water usage to estimate treatment capacity needs.
• Any existing treatment equipment details and why they may not meet current demands.

This information helps in assessing whether a treatment system can keep pace with your household's actual water consumption and arsenic levels.

How Many Samples and Wells Support the Grant County Data?

The data for Grant County’s aquifer 122CBRV comes from 14 measurements across 6 wells sampled over 14 years, between 2010 and 2024. These wells vary in depth from 147 to 568 feet, providing a broad overview of groundwater arsenic concentrations in the area. While this is a relatively small sample set, it offers insight into typical arsenic levels residents may expect locally.

Remember, these figures do not reflect your well specifically. Your water may differ due to variations in local geology, well construction, and other factors.

Interpreting 'Detected', 'Median', and 'Range' in This Regional Sampling

In the Grant County aquifer 122CBRV data, arsenic was detected in every sample at levels ranging from 0.84 to 6.6 µg/L, with a median concentration of 4.6 µg/L. ‘Detected’ means arsenic was present at measurable levels in all samples, not that it exceeds regulatory limits. In fact, none of these samples surpassed federal arsenic thresholds.

The ‘median’ represents the middle value when all sample results are ordered, providing a sense of typical arsenic amount. The ‘range’ shows the lowest and highest detected concentrations, indicating natural variability across wells and time.

How Arsenic Enters the Grant County Aquifer and Your Water Supply

Arsenic in groundwater generally originates from natural geological formations where arsenic-containing minerals dissolve into the water over time. In aquifer 122CBRV, this process leads to measurable but below-threshold arsenic in sampled wells. Human activities are not the primary source here, but local conditions such as well depth and aquifer composition influence arsenic levels.

Understanding this natural origin helps clarify that some arsenic presence is expected, and managing it requires targeted treatment rather than assuming contamination or safety breaches.

Concluding with Your Household's Arsenic Treatment Solution

After measuring your household’s actual water demand and testing your well water for arsenic, addressing any treatment gaps is essential. The Fleck Arsenic Filter is designed to handle residential arsenic concerns effectively, matching capacity to your usage and reducing arsenic as documented in its specifications. It ships ready to configure for your household needs, offering a practical step forward when your current equipment cannot keep up.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2024-07-23. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Arsenic in the 122CBRV aquifer (Grant County): 14 results from 6 wells, median 4.6 ug/L, range 0.84-6.6 ug/L; none above any federal threshold