FL9000 COMBO KIT

The FL9000 Combo Kit from Water Softener Plus is a complete rebuild bundle for the Fleck 9000 control valve, bringing together the major wear components needed for a full overhaul in one convenient package. Instead of tracking down each part separately, you get a matched set engineered for the 9000 valve, listed under the Fleck Repair Kits service category. This is the smart, economical way to bring a tired twin-tank valve back to dependable, leak-free operation.

Everything in the Kit

This combo kit includes the following genuine components for the Fleck 9000:

• (1) FL60400 - 9000 Top Piston
• (1) FL60401-001 - 9000 Lower Piston
• (1) FL60125 - 9000 Upper Seal & Spacer Kit
• (1) FL60421 - 9000 Lower Seal Kit
• (1) FL18743-1 - Drive Motor, 120 Volt / 60Hz, Brass Gear

Together these parts refresh the pistons, seals, spacers, and drive motor, which are the components most responsible for the valve's cycling, sealing, and timing. The top and lower pistons travel through their seal stacks to open and close the valve's internal ports; the upper and lower seal and spacer kits restore the watertight barriers between those ports; and the 120-volt brass-gear drive motor reliably advances the valve through each stage of the cycle. Replacing them all together as a set returns the 9000 to factory tolerances in a single service.

The Fleck 9000 is prized for continuous twin-tank operation, delivering treated water around the clock as one tank serves while the other regenerates. Because of that constant cycling, its wear components age in parallel, which is exactly why a full combo rebuild makes more sense than replacing parts piecemeal, and far more sense than replacing the entire valve. This kit is ideal for installers performing scheduled overhauls or homeowners restoring an aging system. To service the valve, take it out of service, depressurize it fully, and follow Pentair's documented Fleck 9000 procedure. Lubricate the new seals with an approved silicone lubricant, confirm the pistons move freely, and verify the drive motor advances the valve correctly through every stage before returning the system to service. Because all of these components wear together over the life of a hard-working twin-tank valve, addressing them as a single bundled rebuild is both more economical and more thorough than piecemeal repairs, leaving you with a valve that performs like new.