{"product_id":"discontinued-see-extended-desc-4","title":"Discontinued-See Extended Desc.","description":"\u003cp\u003eThis Fleck injector body screw for the 2510 control valve is a discontinued individual part from Pentair, now offered only within certain service kits. Though small in size, this fastener is integral to securing the injector assembly that drives brine draw during the regeneration cycle. When rebuilding the injector, having the correct screws on hand is just as important as replacing the larger injector components themselves, since proper fastening keeps everything sealed and aligned.\u003c\/p\u003e\u003ch3\u003eWhy the Injector Body Matters\u003c\/h3\u003e\u003cp\u003eThe injector is the heart of brine eduction on a Fleck control valve. During the brine cycle, it creates the venturi suction that pulls brine solution from the tank and draws it through the resin bed to recharge the softening media so the system is ready for another service run. The injector body screw holds the injector components firmly and squarely in place, so a complete and correct set of fasteners is essential to maintaining a proper seal and the precise geometry the injector needs to generate consistent, reliable suction.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the Fleck 2510 control valve\u003c\/li\u003e\n\u003cli\u003eFunction: secures the injector body assembly in position\u003c\/li\u003e\n\u003cli\u003eDiscontinued as a standalone item\u003c\/li\u003e\n\u003cli\u003eIncluded in kits FL60080-00, FL60480-03, and FL60481-22\u003c\/li\u003e\n\u003cli\u003eAuthentic Fleck\/Pentair hardware\u003c\/li\u003e\n\u003cli\u003eVery light, listed at approximately 0.01 lbs per each\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen servicing the injector on a 2510 valve, ordering one of the listed kits ensures you receive this screw along with the related injector parts, screens, and seals needed for a clean, complete rebuild rather than a partial fix. Always match genuine Fleck components to your exact valve model to maintain reliable brine draw and consistent regeneration over the life of the system. Refreshing the entire injector assembly periodically, including its fasteners, is one of the most effective ways to keep a softener regenerating thoroughly and using salt economically year after year. Keeping a small assortment of injector hardware on hand means a single missing screw will never delay an otherwise quick brine-system service, helping you return the softener to full, salt-efficient operation without an extra trip for parts. A complete, properly fastened injector assembly is the difference between a softener that regenerates fully and one that quietly underperforms, so the small parts truly matter here.\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":45668800823349,"sku":"FL10692","price":6.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0552\/4950\/2261\/files\/fl10692.jpg?v=1782533678","url":"https:\/\/watersoftenerplus.com\/ko-as\/products\/discontinued-see-extended-desc-4","provider":"Water Softener Plus","version":"1.0","type":"link"}