Fleck Whole-Home + Drinking Combo System

Buy Now

View full details

Number of Samples and Well Sources Behind Prince George's County Water Data

The City of Bowie public water system serves about 25,000 people through 7,921 connections in Prince George's County. This system uses groundwater from multiple wells as its source. Government data is based on a comprehensive sampling program covering these wells and the distribution network, but it summarizes conditions across the system rather than any single home. Given that the data aggregates many sampling points, individual household water can vary, and only specific tests at the household level can determine personal water quality.

Understanding What a Certified Laboratory Test Reports and Its Interpretation

A certified lab test on your home's water will measure concentrations of various constituents to provide precise information about your water's condition. Unlike system-wide data, such individual tests reflect your specific plumbing and water conditions, such as lead levels in your home's distribution system, which the public system reported as a lead 90th percentile of zero milligrams per liter in 2020, indicating minimal widespread lead detected at that time. Reading laboratory results requires noting which substances are present and their amounts relative to standards, but presence alone does not imply a health risk.

Differences Between Public Water System Records and Private Well Testing

Public water system records like those for Bowie cover many homes and wells, reporting on average and range but not pinpointing individual home variations. In contrast, private well testing examines one specific source, providing precise data relevant only to that well. Public system data can inform expectations about regional water trends but cannot substitute for testing your home's actual water quality, especially since plumbing materials and local conditions influence water at the tap.

How the Fleck Whole-Home + Drinking Combo System Addresses Water Constituents

The Fleck Whole-Home + Drinking Combo System ships ready to configure and provides comprehensive treatment by using tested filtration and conditioning methods that collectively address a range of potential water quality issues. With a grain capacity of 32,000, it is designed to effectively reduce unwanted constituents contributing to taste, staining, or scaling, though it does not address the water source or plumbing-specific contaminants without targeted testing. This system offers an integrated approach to improve water quality throughout the home, complementing knowledge gained from public water data and certified water testing.

Changes in Water Quality at the Tap After Using the Fleck System

Once the Fleck system is in place, households typically notice improvements such as clearer water, reduced scaling on fixtures, and better taste and odor satisfaction. While the system does not modify the public water's basic safety profile, it helps mitigate aesthetic and water quality concerns that might arise from constituents detected by public system sampling or your own water tests. The water after treatment tends to be more consistent and pleasant for drinking and general household use.

Summary: This page guided you through interpreting public water system data for Prince George's County and how it differs from individual home testing. It also explained how the Fleck Whole-Home + Drinking Combo System can serve as a solution to improve your household's overall water experience based on informed decisions.

Where this information comes from

Source: EPA SDWIS public water system record. Sampled 2020-12-31. These figures describe the public water system's record, not the plumbing inside any individual building.

On record: EPA SDWIS record for CITY OF BOWIE (MD0160002), groundwater supply, serving 25000 people: 1 health-based violations of 3 total; lead 90th percentile 0 mg/L