If Your Water Fixture Shows Unusual Taste or Cloudiness
Some households in Waukesha County may notice slight changes in water taste or appearance, which can prompt concerns about uranium and radium levels. While the local aquifer 110QRNR has been well sampled, these observations might signal the need for further water quality evaluation to confirm if uranium or radium present affect your household water.
If You Want to Understand the Frequency and Scope of Area Sampling
Seventeen uranium test results from eight different wells, sampled between 2010 and 2021, provide the regional context for Waukesha County aquifer 110QRNR. All 17 samples detected uranium in the range of 0.141 to 1.22 micrograms per liter with a median of 0.541 micrograms per liter. Importantly, none of these results exceeded federal thresholds, affirming that these area wells measure uranium but within federally recognized limits.
If You Wonder How Well Depth Influences Uranium Measurements
The sampled wells lie between 17 and 49 feet deep, indicating that uranium concentrations in this shallow groundwater have been fairly consistent across these depths. This suggests that similar shallow private wells might also exhibit comparable uranium levels, but exact conditions can vary. Uranium and radium concentrations may differ at greater depths, so knowing your own well’s depth is important when interpreting your water quality.
If You Are Considering the Effects of Untreated Uranium-Radium Over Time
Long-term exposure to uranium and radium at levels found in this aquifer does not indicate exceeding federal safety thresholds. However, untreated uranium and radium can contribute to water discoloration or scaling and may influence taste over the years. Assessing these changes can help decide if treatment is beneficial for preserving water quality and household plumbing.
If You Want to Know How Uranium Levels Vary Over Multiple Years
The 11-year span of sampling from 2010 to 2021 shows uranium levels fluctuate between 0.141 and 1.22 micrograms per liter in Waukesha County’s aquifer 110QRNR. These variations highlight natural changes in groundwater chemistry influenced by factors such as seasonal recharge or geological shifts. Regular monitoring or periodic testing can clarify if your household water reflects similar patterns.
If You Are Planning the Steps to Confirm Your Well’s Uranium Status
Start with a basic water quality check at your tap for indicators like taste or staining that could suggest uranium presence. Then proceed to laboratory testing specific for uranium and radium to establish precise concentrations at your home. This targeted approach helps avoid assumptions based solely on area data and ensures your treatment decision matches your water conditions.
Once water testing confirms uranium or radium concerns, the Pentair Uranium & Radium System offers a documented treatment path. This system supports up to 32000 grains capacity and ships ready to configure for household water needs.
This page has guided you from observing potential water quality changes, understanding local uranium data, considering test depth impacts, evaluating untreated effects, reviewing long-term variation, to planning stepwise confirmation. Together these help households in Waukesha County weigh treatment methods thoughtfully for uranium and radium concerns.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2021-05-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Uranium in the 110QRNR aquifer (Waukesha County): 17 results from 8 wells, median 0.541 ug/L, range 0.141-1.22 ug/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.