Autotrol Sensitive Skin & Eczema System

Buy Now

View full details

Household Symptoms That Indicate Sensitive Skin Related to Water

Skin irritation occurs after bathing or showering

Skin discomfort following water exposure might relate to mineral content typical of the aquifer 230SDMR supplying Lee County.

Symptoms persist despite using standard soaps and lotions

If symptoms remain despite skin care adjustments, water quality factors may play a role.

Symptoms are not seasonal or related to allergens

Water-induced skin sensitivity will generally not fluctuate with outdoor allergen levels or seasons.

Water mineral content variation is unknown without testing your well or tap

Government sampling shows a range of calcium and magnesium hardness from 6.14 to 481.0 mg/L in Lee County wells, but individual water hardness requires direct testing to confirm.

Changes to Consider for Larger or Seasonal Households

Increased water use affects treatment system capacity needs

Larger households may demand higher treatment grain capacity; the Autotrol Sensitive Skin & Eczema System provides up to 32,000 grains of conditioning to accommodate this.

Seasonal homes may require system standby mode or periodic flushing

Water sitting idle in pipes can influence skin effects; periodic water flow helps maintain water quality.

Second homes benefit from water quality reassessments when occupied

Water hardness and mineral content may vary over time; retesting ensures continued suitability of the treatment system.

Fixtures and Processes Most Affected by Water Quality for Sensitive Skin

Showers and bathtubs expose skin to water directly and extensively

Mineral-rich water can cause skin sensations worsening sensitive skin conditions.

Bathroom faucets influence face and hand contact

Hard water minerals can leave residues that irritate delicate skin areas.

Laundry water quality can affect clothes that contact skin but is less direct

Mineral deposits on fabric may influence skin comfort, although less immediately than bathing water.

Influence of Plumbing Material and Age Independent of Source Water

Older pipes may leach materials affecting skin

Plumbing components themselves can influence water composition, potentially aggravating sensitive skin.

Plastic or coated pipes usually minimize additional mineral introduction

Modern piping materials tend not to add to water hardness or irritants but do not reduce naturally occurring minerals.

Pipe scale buildup can compound water hardness effects

Over time, mineral deposits inside pipes may increase water’s contact with residual minerals.

Additional Questions for Commercial or Industrial Operators

Volume and peak demand considerations

Higher flow rates and volume require treatment systems rated for increased grain capacity and flow tolerance.

Regulatory compliance beyond residential standards

Facilities may need to verify water parameters with certified lab tests beyond local sampling.

Water reuse or specialized rinse processes

Some processes require very low mineral content to protect product or equipment, a separate concern from typical household sensitive skin issues.

Sampling Depth, Well Depth, and Water Source Impact Expectation

Lee County aquifer wells sampled ranged from 60 to 370 feet

Depth influences mineral content; deeper wells often show higher hardness but individual testing is needed.

Groundwater mineral levels vary naturally within this range

The 53 samples showed a median hardness of 107.0 mg/L, spanning from 6.14 to 481.0 mg/L calcium and magnesium combined, all below federal thresholds.

Municipal or private wells sourcing this aquifer may differ locally

Sampling data represent regional conditions and do not substitute for a direct test of your water supply.

Recommended next step: Order a certified laboratory water hardness test focused on calcium and magnesium concentrations specifically from your household water source. A result aligning with the regional range identifies the need for specialty water conditioning. The Autotrol Sensitive Skin & Eczema System ships ready to configure and offers treatment capacity up to 32,000 grains to address typical mineral hardness affecting sensitive skin in this region.

Where this information comes from

Source: USGS groundwater sampling. Sampled 2012-08-09. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.

On record: U.S. Geological Survey sampling of Hardness, Ca, Mg in the 230SDMR aquifer (Lee County): 53 results from 53 wells, median 107.0 mg/L, range 6.14-481.0 mg/L; none above any federal threshold