If your household nitrate treatment has stopped working, you may notice water quality changes such as different taste or concerns about safety, though these signs alone don't reveal nitrate levels. Without functioning equipment, testing is needed to know what your water contains.
What a Certified Laboratory Test for Nitrate Reports and How to Read It
A certified lab test for nitrate or nitrite reports concentrations in milligrams per liter (mg/L) based on your specific water sample. This is the only way to know your household water's nitrate content accurately. Reported figures show detection levels but do not by themselves indicate safety or violation of standards. Safe consumption levels are defined federally, and results below these thresholds are not health violations.
How Sample Depth, Well Depth, or Source Type Affects What to Expect
Water samples taken from different depths or source types can show variation in nitrate levels. Wells tapping deeper aquifers may have different nitrate presence than shallow wells. In Franklin County's 112SRFD aquifer, government sampling found nitrate in all tested wells but at low concentrations. Your well's characteristics will affect nitrate levels, so local area data are a guide but not a substitute for personal testing.
How Treated Water Differs at the Tap with the Documented Technology
When nitrate removal equipment such as the Fleck Nitrate & Nitrite (Well) Filter is functioning, it reduces nitrate and nitrite concentrations in household water, improving taste and reducing potential health concerns. This system ships ready to configure for your water line. After treatment, nitrate levels at the tap should be significantly lower compared to untreated supply, assuming system capacity matches household demand.
How Nitrate Enters Groundwater or Distribution Systems in Franklin County
Nitrate in Franklin County's 112SRFD aquifer typically originates from sources like fertilizer use, septic systems, and natural soil processes. These sources can leach nitrate into groundwater over time. The aquifer sampling conducted by the U.S. Geological Survey reflects combined influence from these factors, showing low levels detected consistently but no exceedance of any federal limit.
What 'Detected,' 'Median,' and 'Range' Mean in the Sampling Record Here
The government record for Franklin County's aquifer 112SRFD shows nitrite detected in all four samples from one well between July 2014 and July 2023. Detected means measurable amounts were found above the method reporting limit. The median of 0.0065 mg/L indicates the middle value among the samples, with a range from 0.003 to 0.015 mg/L showing variability. None of these figures surpass any federal nitrate or nitrite health-based thresholds.
If you have measured your household nitrate exposure, matching that demand with the Fleck Nitrate & Nitrite (Well) Filter provides a documented approach to reduce these levels effectively. This equipment ships ready to configure and can help restore your water quality after previous treatment failure.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2023-07-20. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Nitrite in the 112SRFD aquifer (Franklin County): 4 results from 1 wells, median 0.0065 mg/L, range 0.003-0.015 mg/L; none above any federal threshold
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.