Step 1: How the Documented Treatment Technology Removes or Neutralises the Constituent
Groundwater samples from wells in Whatcom County's 112SUMS aquifer show total dissolved solids (TDS) ranging from 0.11 to 210.0 mg/L, with a median of 99.0 mg/L. The Autotrol Complete Well System is designed to handle such dissolved solids effectively up to its 32,000 grain capacity. It works by selectively removing and reducing the TDS content through a regeneration process that refreshes the filtering media, thus improving water clarity and reducing potential taste or staining issues caused by dissolved minerals.
Step 2: What the Measured Range Means Against the Relevant Federal Standard, and What It Does Not Mean
The US Geological Survey's sampling of multiple wells shows that no TDS measurements in this area exceeded any federal threshold. Detected TDS levels are typical for groundwater and do not indicate any safety concerns. However, these levels can influence water aesthetics, such as taste and mineral deposits. It’s important to note this data reflects the region’s aquifer overall and does not specify your well's actual content, which requires individual testing.
Step 3: Which Fixtures, Appliances or Processes Are Affected First and Why
In homes using groundwater from this aquifer, appliances like water heaters, dishwashers, and coffee makers may develop mineral buildup over time if TDS is moderately elevated. Faucets and sinks might show slight spotting or scaling as dissolved solids precipitate during water heating or evaporation. The Autotrol System helps mitigate these effects by lowering the dissolved solids before water reaches household points of use.
Step 4: What the Reader Should Write Down Before Asking Anyone for Treatment Advice
Before proceeding with any treatment purchase, document the following:
- The depth and source of your well water.
- Any recent water test reports showing your well's TDS levels and other key parameters.
- Household water usage patterns and number of occupants.
- Known issues like scaling, taste, or appliance maintenance challenges.
- Any existing water treatment equipment details.
Step 5: What Happens When This Problem Is Left Untreated for Years, Stated Without Exaggeration
If moderately elevated total dissolved solids persist untreated, gradual mineral buildup can occur inside pipes and on fixtures. This may reduce appliance efficiency and increase cleaning frequency. Although it is not a health risk based on the measured levels, long-term maintenance demands and water aesthetics can decline noticeably.
Step 6: How to Judge Treatment Capacity Against the Household's or Facility's Daily Demand
The Autotrol Complete Well System offers a grain capacity of 32,000, which supports moderate to high daily water usage typical of residential households. To select the appropriate capacity, calculate your average daily water consumption and the TDS concentration from your well’s test report. Multiplying TDS concentration by daily use will estimate the total dissolved solids load to be treated, guiding whether this system fits your household’s needs.
Closing: To confirm the best treatment approach, obtain a comprehensive water quality test from your well that includes total dissolved solids measurement. If the TDS concentration aligns with or is below the range documented for Whatcom County’s 112SUMS aquifer, the Autotrol Complete Well System can effectively address your water treatment requirements by reducing dissolved solids and improving water performance across your home.
Where this information comes from
Source: USGS groundwater sampling. Sampled 2018-08-08. These figures describe groundwater sampled in this area. They are not a test of any individual private well - only a test of that well can establish its own water.
On record: U.S. Geological Survey sampling of Total dissolved solids in the 112SUMS aquifer (Whatcom County): 33 results from 8 wells, median 99.0 mg/L, range 0.11-210.0 mg/L; none above any federal threshold