How Autotrol System Addresses Bacteria in Household Water
Removes Coliform and Bacteria through Filtration
The Autotrol Bacteria & Coliform (Well) Filter operates by physically removing bacteria and coliform organisms from water that enters a household. This mechanical filtration limits bacteria presence in treated water, helping reduce potential contamination.
Functions Independently of Chemical Disinfectants
The system's technology does not rely on chemicals but focuses on filtering bacteria particles, providing an alternative to disinfectant-based methods.
Routine Care and Maintenance of the Autotrol System
Regular Media Replacement Recommended
The filtration media within the Autotrol System requires scheduled replacement to maintain effective bacteria removal, which is essential for consistent performance.
Periodic System Backwashing Needed
To prevent clogging and maintain filtration efficiency, the system is designed to flush itself at intervals, a process that can be configured for household water volumes.
Distinguishing Bacteria from Other Common Water Issues
Bacteria vs. Aesthetic Water Quality Issues
Bacteria presence is a microbiological concern, whereas issues like taste, odor, or staining relate to chemical or mineral content, which require different considerations and solutions.
Bacteria vs. Chemical Contaminants
Chemical contaminants such as metals or synthetic compounds differ significantly in origin and treatment compared to bacteria; this system is tailored specifically to microbiological particles.
Interpreting Regional Bacteria-Related Data for Bronx,Kings,New York,Queens,Richmond
New York City Surface Water Supply Recorded 1 Health-Based Violation
The EPA's public water system record for the New York City System (NY7003493), serving the five boroughs including Bronx, Kings, New York, Queens, and Richmond counties, notes one health-based violation among ten total from surface water sources. This is a system-wide record, not specific to any single tap.
EPA Lead 90th Percentile Measure Reflects Distribution, Not Source
A 0.01 mg/L lead concentration at the 90th percentile was measured in samples reflecting plumbing distributions as of the end of 2024; this figure does not represent source water quality and is separate from bacteria concerns.
Detection Does Not Equal Unsafe Water
The presence or detection of bacteria in water systems does not mean the water is unsafe or out of compliance; only specific tests of a household’s water can determine individual conditions.
Evaluating Treatment Needs Against Household Water Use
Consider Daily Water Volume for Effective Filtration
Understanding the household’s daily water consumption helps determine the necessary treatment capacity of the Autotrol System to maintain bacteria filtration without compromising flow rates or water pressure.
Adjust System Reset and Backwash Frequency Accordingly
The system’s configuration can be set to handle higher or lower volumes, adjusting backwash intervals to sustain performance based on usage patterns.
This page summarizes regional water quality data from the New York City System as provided by EPA public records, covering Bronx, Kings, New York, Queens, and Richmond counties. For detailed regional information, visit the EPA’s public water system data source.
Where this information comes from
Source: EPA SDWIS public water system record. Sampled 2024-12-31. These figures describe the public water system's record, not the plumbing inside any individual building.
On record: EPA SDWIS record for NEW YORK CITY SYSTEM (NY7003493), surface water supply, serving 8271000 people: 1 health-based violations of 10 total; lead 90th percentile 0.01 mg/L
- ✓ 90-Day Money-BackNo restocking fees — return within 90 days.
- ✓ Manufacturer WarrantyGenuine Fleck · Pentair · VIQUA equipment.
- ✓ Free Expert SizingTalk to a specialist and buy the right system the first time.